ASTM A36 A50 Structural Steel H Beam For Supporting Roof A572 A992

H beam is a structural beam made of rolled steel. It is incredibly strong. It gets its name because it looks like a capital H over the cross-section. H-beam has wider flanges than I-beam, but I-beam has tapered edges. The width is the flange and the height is the web.

The difference between H beam and I beam.

The inner and outer sides of the H-shaped steel flange are parallel or close to parallel, and the flange ends are at right angles, hence the name Parallel Flange I-beam. The thickness of the web of the H-beam is smaller than that of the ordinary I-beam with the same height of the web, and the flange width is larger than that of the ordinary I-beam with the same height of the web, so it is also called the wide-edge I-beam. Determined by the shape, the section modulus, moment of inertia and corresponding strength of H-beams are significantly better than ordinary I-beams of the same single weight. Used in metal structures with different requirements, whether it bears bending moment, pressure load, or eccentric load, it shows its superior performance. Compared with ordinary I-beam, it can greatly improve the load-bearing capacity and save metal by 10%-40%. H-shaped steel has wide flanges, thin webs, multiple specifications, and flexible use. It can save 15% to 20% of metal when used in various truss structures. Because the flanges are parallel inside and outside, and the edges are at right angles, it is easy to assemble and assemble various components, which can save about 25% of the welding and riveting workload, which can greatly accelerate the construction speed of the project and shorten the construction period.

Due to the above advantages, H-beams are widely used, mainly used for: various civil and industrial building structures; various large-span industrial plants and modern high-rise buildings, especially industrial plants in areas with frequent seismic activity and high temperature working conditions; requirements Large-scale bridges with large bearing capacity, good section stability and large spans; heavy equipment; highways; ship skeletons; mine support; foundation treatment and embankment engineering; various machine components.

Packing:
(1):Standard seaworthy export packing, wooden pallets with plastics protection .
(2) Max 20-25MT can be loaded into 20'container and 40'container.
(3)The other packing can be made based on the customer requirement.

Delivery time:
If we have stocks for your demanded size, we can deliver within 3 days.
For customised sizes and in quantity over100 kg (Some materials are allowed MOQ 50 kg),we can guarantee delivery within 3 weeks or 25 days.

Internationally, the product standards of H-beams are divided into two major categories: the imperial system and the metric system. The United States, Britain and other countries adopt the imperial system, while China, Japan, Germany and Russia adopt the metric system. Although the units of measurement used in the imperial system and the metric system are different, most H-beams use four sizes to indicate their specifications, namely: web height h. Flange width b, web thickness d and flange thickness t. Although countries around the world have different ways of expressing H-beam size specifications. However, the product size specification range and dimensional tolerances of the products produced are not much different.